Absolare

Modifications:

"Altius" - Limited edition. Installation is done with Echole Limited Edition and Infinity cables, silver signal capacitors, pure silver connectors. Altius optimized signal and power topology.

"Passion" - Starter version. Installation was performed with Echole Signature cables, Mundorf Silver Gold oil capacitors, 20 micron gold-plated connectors.

"Signature" - Higher version than Passion. Installation was performed using Echole Glorious and Omnia cables. Signature optimized power topology.

Hybrid power amplifiers Absolare:

Absolare Altius HPM - a pair of hybrid mono power amplifiers.

Power: 1x200W (8 ohms), 1x320W (4 ohms);
Pre-stage using a selected pair of NOS tubes: 12AU7/ECC82;
Transistor output stage;
Input impedance: RCA - 10 kOhm, XLR - 20 kOhm;
Input sensitivity: 1.3 V (Hi-gain), 2.6 V (Low-gain);
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 15 Hz - 30 kHz (+/- 1 dB);
Acoustic impedance: 4 - 8 Ohm;
Inputs: 1 x RCA, 1 x XLR;
Outputs: 1 pair of speaker terminals;
Color: almond, black, nutella, red;
Dimensions (HxWxD): 200 x 382 x 648 mm (excluding legs);
Weight: 34 kg.

Absolare Passion HPS - stereo hybrid power amplifier.

Power: 2x175W (8 ohms), 2x275W (4 ohms);
Pre-stage using a selected pair of NOS tubes: 12AU7/ECC82;
Transistor output stage;
Input impedance: RCA - 10 kOhm, XLR - 20 kOhm;
Input sensitivity: 1 V (Hi-gain), 2 V (Low-gain);
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 15 Hz - 30 kHz (+/- 1 dB);
Acoustic impedance: 4 - 8 Ohm;
Inputs: 2 x RCA, 2 x XLR;
Outputs: 2 pairs of speaker terminals;
Color: almond, black, nutella, red;
Dimensions (HxWxD): 200 x 382 x 648 mm (excluding legs);
Weight: 33 kg.

Absolare Signature HPM - a pair of hybrid mono power amplifiers.

Power: 1x200W (8 ohms), 1x320W (4 ohms);
Pre-stage using a selected pair of NOS tubes: 12AU7/ECC82;
Transistor output stage;
Input impedance: RCA - 10 kOhm, XLR - 20 kOhm;
Input sensitivity: 1.3 V (Hi-gain), 2.6 V (Low-gain);
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 15 Hz - 30 kHz (+/- 1 dB);
Acoustic impedance: 4 - 8 Ohm;
Inputs: 1 x RCA, 1 x XLR;
Outputs: 1 pair of speaker terminals;
Color: almond, black, nutella, red;
Dimensions (HxWxD): 200 x 382 x 648 mm (excluding legs);
Weight: 34 kg.

Absolare Signature HPS - stereo hybrid power amplifier.

Power: 2x175W (8 ohms), 2x275W (4 ohms);
Pre-stage using a selected pair of NOS tubes: 12AU7/ECC82;
Transistor output stage;
Input impedance: RCA - 10 kOhm, XLR - 20 kOhm;
Input sensitivity: 1 V (Hi-gain), 2 V (Low-gain);
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 15 Hz - 30 kHz (+/- 1 dB);
Acoustic impedance: 4 - 8 Ohm;
Inputs: 2 x RCA, 2 x XLR;
Outputs: 2 pairs of speaker terminals;
Color: almond, black, nutella, red;
Dimensions (HxWxD): 200 x 382 x 648 mm (excluding legs);
Weight: 33 kg.

Integrated power amplifiers Absolare:

Absolare Altius 2 Int - hybrid integrated amplifier. Dual mono.

Pre-tube stage: 2 x 12AU7/ECC82 (NOS);
Transistor power amplifier: 2x200 W (4 Ohms), 2x150 W (8 Ohms);
Input impedance: 100 kOhm;
Input sensitivity: 0.5 V (balanced version 2 V);
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 15 Hz - 30 kHz (+/- 1 dB);
Acoustic impedance: 4 - 8 Ohm;
Input modifications: 2 x RCA + 2 x XLR (RCA/XLR model); 4 x RCA (RCA model); 4 x XLR (XLR model);
Outputs: 2 pairs of speaker terminals;
Color: almond, black, nutella, red;
Dimensions (HxWxD): 200 x 382 x 674 mm (excluding legs);
Weight: 33 kg.

Absolare Passion 2 Int - hybrid integrated amplifier. Dual mono.

Pre-tube stage: 2 x 12AU7/ECC82 (NOS);
Transistor power amplifier: 2x200 W (4 Ohms), 2x150 W (8 Ohms);
Input impedance: 100 kOhm.
Input sensitivity: 0.5 V (balanced version 2 V).
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 15 Hz - 30 kHz (+/- 1 dB).
Acoustic impedance: 4-8 Ohm.
Input modifications: 2 x RCA + 2 x XLR (RCA/XLR model); 4 x RCA (RCA model); 4 x XLR (XLR model).
Outputs: 2 pairs of speaker terminals.
Color: almond, black, nutella, red;
Dimensions (HxWxD): 200 x 382 x 674 mm (excluding legs).
Weight: 33 kg.

Absolare Signature 2 Int - hybrid integrated amplifier. Dual mono.

Pre-tube stage: 2 x 12AU7/ECC82 (NOS);
Transistor power amplifier: 2x200 W (4 Ohms), 2x150 W (8 Ohms);
Input impedance: 100 kOhm;
Input sensitivity: 0.5 V (balanced version 2 V);
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 15 Hz - 30 kHz (+/- 1 dB);
Acoustic impedance: 4 - 8 Ohm;
Input modifications: 2 x RCA + 2 x XLR (RCA/XLR model); 4 x RCA (RCA model); 4 x XLR (XLR model);
Outputs: 2 pairs of speaker terminals;
Color: almond, black, nutella, red;
Dimensions (HxWxD): 200 x 382 x 674 mm (excluding legs);
Weight: 33 kg.

Power Amplifiers Absolare:

Absolare Altius 845SE - a pair of tube, single-ended, mono class "A" power amplifiers with zero feedback.

Output power: 52 W;
Each block comes with selected NOS tubes: input stage - 2 x 6SN7, output stage - 2 x 845;
Input impedance: 75 kOhm;
Input sensitivity: 1.25 V (balanced version 1.25 / 5 V);
Gain: 24 dB (8 ohms), 21 dB (4 ohms);
Frequency range: 20 Hz - 20 kHz (+/- 1 dB);
Acoustic impedance: 4 - 8 Ohm;
Inputs: 1 x RCA (XLR optional);
Outputs: acoustic terminals;
Color: almond, black, nutella, red;
Dimensions (HxWxD): 255 x 382 x 648 mm (excluding legs);
Weight: 42.2 kg.

Absolare Signature 845SE - a pair of tube, single-ended, mono class "A" power amplifiers with zero feedback.

Output power: 52 W;
Each block comes with selected NOS tubes: input stage - 2 x 6SN7, output stage - 2 x 845;
Input impedance: 75 kOhm;
Input sensitivity: 1.25 V (balanced version 1.25 / 5 V);
Gain: 24 dB (8 ohms), 21 dB (4 ohms);
Frequency range: 20 Hz - 20 kHz (+/- 1 dB);
Acoustic impedance: 4 - 8 Ohm;
Inputs: 1 x RCA (XLR optional);
Outputs: acoustic terminals;
Color: almond, black, nutella, red;
Dimensions (HxWxD): 255 x 382 x 648 mm (excluding legs);
Weight: 42.2 kg.

Absolare Altius 845PP - a pair of Class "A" tube push-pull mono power amplifiers with zero feedback.

Output power: 85 W;
Each block comes with selected NOS tubes: input stage - 1 x 12AT7 / ECC81, 2 x EL34, output stage - 2 x 845;
Input impedance: 100 kOhm;
Input sensitivity: 1.5 V (balanced version 3 / 6 V);
Gain: 24 dB (8 ohms), 21 dB (4 ohms);
Frequency range: 15 Hz - 25 kHz (+/- 1 dB);
Acoustic impedance: 4 - 8 Ohm;
Inputs: 1 x RCA (XLR optional);
Outputs: acoustic terminals;
Color: almond, black, nutella, red;
Dimensions (HxWxD): 295 x 382 x 622 mm (excluding legs).
Weight: 42 kg.

Absolare Signature 845PP - a pair of Class "A" tube push-pull mono power amplifiers with zero feedback.

Output power: 85 W;
Each block comes with selected NOS tubes: input stage - 1 x 12AT7 / ECC81, 2 x EL34, output stage - 2 x 845;
Input impedance: 100 kOhm;
Input sensitivity: 1.5 V (balanced version 3 / 6 V);
Gain: 24 dB (8 ohms), 21 dB (4 ohms);
Frequency range: 15 Hz - 25 kHz (+/- 1 dB);
Acoustic impedance: 4 - 8 Ohm;
Inputs: 1 x RCA (XLR optional);
Outputs: acoustic terminals;
Color: almond, black, nutella, red;
Dimensions (HxWxD): 295 x 382 x 622 mm (excluding legs);
Weight: 42 kg.

Pre-power amplifiers Absolare:

Absolare Altius Pre - tube single-ended preamplifier with zero feedback.

Tubes selected by NOS: 2 x 12AU7 / ECC82;
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 10 Hz - 45 kHz (+/- 1 dB);
Maximum gain: 16 dB;
Volume: 48-step attenuator with discrete resistors;
Input impedance: 100 kOhm;
Output impedance: 750 Ohm;
Modifications, inputs: 2 x RCA + 2 x XLR (RCA/XLR model); 4 x RCA (RCA model); 4 x XLR (XLR model);
Modifications, outputs: 1 x RCA + 1 x XLR (RCA/XLR model); 2 x RCA (RCA model); 2 x XLR (XLR model);
Color: almond, black, nutella, red;
Dimensions (HxWxD): 148 x 382 x 526 mm (excluding legs);
Weight: 21 kg.

Absolare Eternum Pre - two-block tube single-ended preamplifier with zero feedback.

Tubes selected by NOS: 4 x 12AU7 / ECC82;
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 10 Hz - 45 kHz (+/- 1 dB);
Maximum gain: 18 dB;
Volume: Continuous carbon strip, remote controlled;
Input impedance: 50 kOhm;
Output impedance: 750 Ohm;
Modifications, inputs: 2 x RCA + 2 x XLR (RCA/XLR model); 4 x RCA (RCA model); 4 x XLR (XLR model);
Modifications, outputs: 1 x RCA + 1 x XLR (RCA/XLR model); 2 x XLR (XLR model);
Color: almond, black, nutella, red;
Dimensions (HxWxD): 148 x 382 x 526 mm (excluding legs);
Weight: 19 kg.

Absolare Passion Pre - tube single-ended preamplifier with zero feedback.

Tubes selected by NOS: 2 x 12AU7 / ECC82;
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 10 Hz - 45 kHz (+/- 1 dB);
Maximum gain: 16 dB;
Volume: 48-step attenuator with discrete resistors;
Input impedance: 100 kOhm;
Output impedance: 750 Ohm;
Modifications, inputs: 2 x RCA + 2 x XLR (RCA/XLR model); 4 x RCA (RCA model); 4 x XLR (XLR model);
Modifications, outputs: 1 x RCA + 1 x XLR (RCA/XLR model); 2 x RCA (RCA model); 2 x XLR (XLR model);
Color: almond, black, nutella, red;
Dimensions (HxWxD): 148 x 382 x 526 mm (excluding legs);
Weight: 21 kg.

Absolare Signature Pre - tube single-ended preamplifier with zero feedback.

Tubes selected by NOS: 2 x 12AU7 / ECC82;
Frequency range: 20 Hz - 20 kHz (+/- 0.2 dB), 10 Hz - 45 kHz (+/- 1 dB);
Maximum gain: 16 dB;
Volume: 48-step attenuator with discrete resistors;
Input impedance: 100 kOhm. Output impedance: 750 Ohm;
Modifications, inputs: 2 x RCA + 2 x XLR (RCA/XLR model); 4 x RCA (RCA model); 4 x XLR (XLR model);
Modifications, outputs: 1 x RCA + 1 x XLR (RCA/XLR model); 2 x RCA (RCA model); 2 x XLR (XLR model);
Color: almond, black, nutella, red;
Dimensions (HxWxD): 148 x 382 x 526 mm (excluding legs);
Weight: 21 kg.

Phono stages Absolare:

Absolare Altius Phono - tube two-block MM/MS phono stage.

Tubes selected by NOS: 3 x 12AX7/ECC83, 2 x 12AU7/ECC82, 4 x 6C45PI;
Frequency range: 20 Hz - 20 kHz;
Resistance settings, input A: 68 ohms, 150 ohms, 330 ohms, 680 ohms, 47 kohms, custom value;
Resistance settings, input B: 47 Ohm, 100 Ohm, 220 Ohm, 470 Ohm, 1 kOhm, custom value;
Input capacitance: 100 pF;
Gain: 61 dB;
Output impedance: 325 Ohm;
Outputs: 1 x RCA or 1 x XLR (depending on model);
Color: almond, black, nutella, red;
Dimensions (HxWxD): 148 x 382 x 500 mm (excluding legs);
Weight: 20 kg.

Current availability, pre-order possibility and cost can be clarified:

By phone: +7 495 920 20 10;
In messengers: Telegram or WhatsApp;
By e-mail: [email protected];
Click the button to "visit showroom".

Cooperation with official suppliers allows us to guarantee the best prices and quality of goods.

OTHER BRANDS

Aavik

Aavik Acoustics manufactures audio components. The product lines consist of several types of amplifiers, digital-to-analog converters, phono stages and streamers. All components set new standards of high-end music reproduction quality.

Accuphase

The company's devices have a recognizable strict retro design and uncompromising accuracy to all details. Each component is assembled manually and tested before shipment. The fundamental doctrine of the company is hi-fi equipment of extra quality!

Anthem

Anthem components allow you to literally lose yourself in the sound, whether you're listening to a stereo or multi-channel system. The brand has an impeccable reputation, and Anthem products regularly receive awards from the most respected magazines in the audio world.

Ascendo

Ascendo amplifiers built into active speakers are also sold separately - in both rack and cabinet form factors. The catalog also includes a wide range of highly efficient multi-channel power amplifiers for cinema halls with configurations from 2 to 16 channels

AUDIOLAB

The Audiolab 8000A has firmly established itself as one of the most successful British amplifiers the industry has ever produced. Experts say the 8000A has essentially created an entirely new market sector. The company's amplifiers can be safely considered for purchase.

AVM Audio

Amplifiers from AVM Audio are a sound center for all types of music, for all volumes, without any excesses, with powerful sound and without any compromises. Executed at the highest level, they almost playfully, effortlessly control any speakers.

Axxess

Axxess Forté is a series of streaming amplifiers consisting of three levels, Forté 1, 2 and 3. Axxess Forté is distinguished by its versatility in terms of its multifunctional properties. It has a streamer, a DAC section, and a built-in amplifier and headphone amplifier.

B.audio

B.audio uses only the finest components and materials in its products to ensure maximum performance and durability. And the use of modern technologies and achievements allows us to achieve excellent sound reproduction when using brand products.

Canton

An AV receiver is essential for true surround sound. Canton wants to simplify the cinema experience into the living room with the Smart Amp 5.1. The compact device combines multi-room HiRes streaming with immersive cinema sound.

Denon

Denon's assortment is quite large and varied, but for the most part we hear about the excellent AV receivers of the Japanese Hi-Fi manufacturer. However, the line of amplifiers occupies a prominent place in it and is constantly being improved.

Esoteric

Esoteric is not just High End, but one of the highest peaks of this already top class of audio equipment. Esoteric, as a division of TEAC, is a recognized leader in the field of “mechatronics” - a fusion of precision mechanics and modern electronics.

Exposure

The company's engineering approach is based on a combination of proven technologies and innovative solutions. Primary attention is paid not to beauty and options, but to sound quality. Each amplifier or other product has the highest quality, reliability and durability.

Ferrum Audio

The Ferrum Audio OOR headphone amplifier is a new take on the amplification process. It handles any headphones without any problems, maximizing their potential and bringing the very essence of music to the listener. OOR is so perfect that it is impossible to imagine.

Fezz Audio

Fezz Audio is made from music and stands for modern technology, design and exceptional form. These devices will allow you to reliably enjoy excellent sound quality, design aesthetics and affordable solutions to suit your needs and budget.

Focal

The Astral 16 multiroom processor and amplifier brings out the best in speaker systems, perfectly coordinating audio and video in a home theater installation. It offers advanced features and unmatched quality for an immersive movie watching experience.

Luxman

An important part of Luxman's legacy in amplifier design is the ODNF negative feedback circuit. The circuit evolved into the Luxman Integrated Feedback Engine System (LIFES1.0) technology, which was used in the Luxman M-10x.

Martin Logan

MDAs are the most flexible and adaptable distribution solutions available today, delivering significant levels of performance where it matters - indoors. The MDA16 powers up to eight zones with sixteen full channels - 60 watts per channel into 8 ohms (120 into 4 ohms).

Michi

Built on Rotel's history and heritage, the new Michi amplifiers represent more than 55 years of design experience combined with the dedication of a family-owned business. When you buy Michi amplifiers, you get the highest possible sound quality and reliability.

Mission

Every feature of the Mission 778X is attractive, thoughtful and sophisticated. Detail, timing and dynamics are excellent, regardless of the source or medium. It is designed for contemporary music lovers with the respect of the company in mind.

Monitor Audio

Monitor Audio installation amplifiers are designed to deliver more in less space. Advanced technology ensures optimal sound quality in any project. These amplifiers can be used in residential and commercial applications that require up to 2000 watts of power.

Onkyo

Onkyo produces the most comprehensive line of AV receivers that allow you to create home theaters of virtually any size. When you buy Onkyo, you become the owner of the most advanced device for creating a true cinema environment in your home.

PMC

The first "home" amplifier in PMC's arsenal in more than 25 years of history. PMC cor is something special, the “heart” (corazon) of your hi-fi system, an amplifier as transparent as the world-famous PMC monitor and home speaker systems.

Primaluna

Primaluna Audio produces high-end pre-amps, integrated tube and hybrid amplifiers and makes them available to audiophiles everywhere. The company's devices have thoughtful connections, protection, and the use of high-quality components.

Quad

Current Dumping was developed by Peter Walker. The primary gain stage provides signal detail, and the final stage provides control over the speakers. Walker was convinced that signal paths should be kept as simple as possible, and signal purity was a must in any design.

Storm Audio

Featuring UMACTM Class D and URECTM technologies, the PA MK3 line delivers audiophile performance with high efficiency, high dynamic range, very low distortion and offers up to 3kW of power with instant real-time response.

Vincent

Many Vincent devices are hybrid, combining semiconductor and tube elements. This helps achieve a unique effect. Components made using hybrid technology combine the main advantages of transistor and tube devices and at the same time avoid their disadvantages.

SHOWROOM

In our showroom, the effect of the room on the sound is minimized. This makes it possible to hear what audio playback devices are capable of at their full potential, as well as easily imagine how they will sound in other conditions. Listening can be organized on the selected equipment and with your own recordings.