Linear power supplies and splitters Ferrum Audio:
HYPSOS creates a fundamentally new category of Hi-Fi components. It is not just a power source, but an integral component of the audio system - as (and perhaps even more) significant as any other.
The most important features are:
Hybrid Power System
Linear/switching hybrid design to get the advantages from both techniques - low ripple and noise as well as fast transient response and high efficiency.
Distinct user levels
Using pre-configured settings from the list of supported devices or setting custom parameters manually. Wide continuous ouput voltage range of 5-30V with up to 6A of current delivered to the load. HYPSOS is as universal a device as it gets.
Sweet Spot Tuning (SST)
Possibility to fine tune the output voltage for the best sound. The voltage level can be safely adjusted on the fly to allow easy comparison testing.
4T Sensing Design (4TSD)
Ensuring the exact voltage level precisely at the point of the powered device DC input terminal - special cable design and feedback to ensure flat voltage at every moment. This technique eliminates the harmful effects of the cable's resistance effectively improving transient response.
Advanced Automation
Compatibility with Apple TV remote, Trigger in/out connector; possibility to automate power-up of the devices with standby mode even without dedicated trigger connection.
Extremely safe to use
Automatic Transformer Voltage Adjust (ATVA), Electronic Output Voltage Polarity Switch and overvoltage, current limit and short protection.
Detailed and revealing yet unfatiguing sound
Makes your current audio setup perform to its potential. Tweak the sound modifying the voltage level on the fly and use the preferred combination of the 4-Terminal Sensing and Spread Spectrum Mode settings.
Works with!
Check out which products are compatible with Hypsos. Compatibility list
Characteristics:
- Power input: 110-120 & 220-240V AC/50-60Hz (EU/US Version), 90 – 110V AC/50-60Hz (JP Version)IEC C14 power inlet, a fuse holder with power on/off switch plus two-stage EMI filter for low impedance load with better noise attenuation in low frequency applications;
- Mains cable: US/EU/UK;
- DC OUT cable: 5×2.5mm DC plug / 5×2.1mm DC plug Custom cables made to order at additional cost;
- Output Voltage Range: 5-30 [V];
- Max Continuous Output Current (for V_out below 13,3V): 6 [A];
- Max Continuous Output Current (for V_out higher than 13,3V): l_out= 80[W] / DCout[V];
- Maximum Impulse Current: 9A;
- Maximum Impulse Power: DC V_out*9A (270W for 30V);
- Max Continuous Output Power (for V_out below 13,3V): P_out = V_out[V] * 6[A];
- Max Continuous Output Power (for V_out higher than 13,3V): 80W;
- Primary winding fuse: IEC 5x20mm, 250V 3.15A, slown-blown for Japan version / 250V 2A, slown-blown for Europe,US version;
- Secondary winding fuse: Littefuse 154004T, 4A
- Power consumption: 230VAC, 50Hz @ 12VDC out/: Idle – 6VA @ 15W load – 30,7VA @ 60W load – 98VA @ 80W load – 133,9VA
- Dimensions (without knob, feet and connectors) (W x D x H , mm / inches): 217.5 x 206.5 x 50.0 / 8.6 x 8.1 x 2.0;
- Net weight (kg / lb): ~ 2,89 / ~ 6.2.
Current availability, pre-order possibility and cost can be clarified:
- By phone: +7 495 920 20 10;
- In messengers: Telegram or WhatsApp;
- By e-mail: [email protected];
- Click the button to "visit showroom".
Cooperation with official suppliers allows us to guarantee the best prices and quality of goods.
