Rovsky StudioRovsky Studio
go back

Powergrip

Powergrip surge protectors:

Powergrip YG-2 - clean power console in a compact design.The wide distribution of digital power supplies in the network leads to a lot of high-frequency interference that interferes with the operation of devices with classic power supplies. The PowerGrip YG-2 console uses various types of filters that allow you to isolate devices, eliminating their unwanted influence on each other, as well as eliminate interference coming from the network. 

The filters used in the PowerGrip YG-2 console are made using Low-density core technology. They provide minimal sine wave distortion and are capable of passing large current pulses, unlike traditional power supply filters. Switching relays operate using Zero cross technology: the load is switched on and off when the supply voltage sinusoid crosses the zero point. Thanks to this, even the most powerful energy consumers are switched on and off softly.

The protection system consists of three levels:

  1. Filters that provide absorption of interference and small bursts;
  2. Varistor protection that absorbs powerful voltage surges in the network;
  3. De-energizes the console if the voltage in the network exceeds the permissible limit.

In addition, the PowerGrip YG-2 console is equipped with a self-diagnostic system. In the event of a malfunction, the connected equipment will be de-energized, and the blinking indicators will inform the user about the problems that have arisen.

PowerGrip YG-2 is able to make life easier for its owner by indicating the correct phasing of connected components and, when included in a smart home system, receiving control signals from 12 V triggers. Protection is not limited only to electrical lines, it also extends to satellite, antenna and cable lines.

Peculiarities

  • Compact body of low height and depth;
  • 6 sockets with programmable turn-on delay;
  • Passes a maximum current of 16 A, allows you to connect two power amplifiers;
  • Protection against overvoltage in the network, as well as in coaxial lines;
  • Mains voltage indication.

Specifications

  • Voltage: 190 - 320 V;
  • Power (at 230 V): 3,680 W;
  • Rated current: 16 A (allows you to connect two power amplifiers);
  • Sockets 220 V: 6;
  • Power lines: General Filter and 2 x High Current Hi-Fi Filter;
  • Coaxial lines: 1;
  • Emergency power off limits: ≤ 190 ± 4 V / ≥ 256 ± 4 V;
  • Peak current: 65,000 A;
  • Manual control: mechanical full shutdown button, sensor under the screen (recognizes only one finger, providing greater responsiveness and eliminating accidental
  • operations);
  • On and off scenarios: setting delays between groups of sockets;
  • Trigger 12V: Input/Output;
  • Integration via RS232 interface: Control4, Crestron, AMX and others;
  • Own power consumption: 1 W – 10 W (depending on functionality)
  • Included: YG-2 console, power cable: 1.5 m (3 m – optional), mounts for a 19-inch rack, documentation;
  • Front panel material: brushed aluminum 4 mm;
  • Color: Black, Silver (black, silver)
  • Dimensions (HxWxD): 80 x 440 x 185 mm;
  • Weight: 4.8 kg.

Powergrip YG-3 - clean power console. Flagship product with wider capabilities and functionality.

12 sockets on the rear panel, divided into six groups, will be enough to connect all elements of the home entertainment system. 6 sockets are designed specifically for power amplifiers. The advanced user interface allows you to configure the device in accordance with the various wishes of users.

Peculiarities

  • Protection from threats from antenna cables;
  • Wi-Fi for remote control;
  • Extensive settings menu;
  • Custom filtering;
  • Automatically connected DC filter;
  • The power cable and plug are rated for 16A;
  • Maximum current 25 A;
  • Display of many network parameters;
  • The YG-3 design includes special damping circuits to reduce the generation of interference by connected devices;
  • The influence on each other of devices included in one group of sockets on the YG-3 console has been reduced;
  • Mechanical decoupling of the YG-3 board from the filters eliminates vibration feedback from the speakers.

Specifications

  • Protection operation limits (consumer disconnection): lower: 190 V, upper: 256 V (may vary depending on sinusoidal distortion in the network and other additional parameters to ensure maximum protection and eliminate false alarms);
  • Protection against high voltage surges: varistors;
  • Controls: seven touch buttons, mechanical full shutdown button;
  • Simple control: 7 touch buttons, consumption sensor turns on the system (if one of the consumers wakes up from standby mode), RS232 trigger input and output
  • and Ethernet option for professional control systems;
  • Remote control: Wi-Fi (service provided by Ewelink service);
  • Integration with control systems (RTI, Control4, Crestron, etc.): RS232 trigger, Ethernet (optional);
  • On-screen settings menu: brightness, color, style, filtering, always-on sockets, delays;
  • Automatic switching on: consumption sensor (detecting exit from consumer standby mode), light sensor (determining the light level in the room;
  • Range of long-term trouble-free operation of the console power supply: 160 – 320 V;
  • Maximum current through console: 25A, 5750W (power cord and plug rated 16A);
  • Zero throughput resistance: < 0.00005 Ohm;
  • Phase throughput resistance (high current hi-fi filter without fuse and cable): 0.015 Ohm;
  • Fuse parameters: resistance: 0.01 Ohm (with holder), size: 5 x 20 mm, current: 16 A;
  • DC component measurement range: +/- 999 mV;
  • Maximum value of absorbed DC component: 1.8 V;
  • Maximum on/off delay: 60 s;
  • Cross-section of power cables internal wiring: 3.3 mm² (High current Hi-Fi section);
  • Power cable cross-section: 3.3 mm²;
  • Own power consumption: 1.4 W – 20 W (depending on functionality);
  • Consumption when completely turned off: 0 W;
  • Included: YG-3 console, power cable: 2 m (3 m – optional), rack mounting brackets, antenna grounding wire, plug for direct cable entry, documentation;
  • Color: Black, Silver (black, silver);
  • Dimensions (HxWxD): 156.5 x 440 x 280 mm (with legs);
  • Weight: 7.6 kg.

With POWERGRIP products you will not only protect your equipment from harmful influences, but also take your system to a new level in both sound and ease of use!

Current availability, pre-order possibility and cost can be clarified:

Cooperation with official suppliers allows us to guarantee the best prices and quality of goods.

OTHER BRANDS

Accuphase

Clean Power Supply components provide quality performance. By comparing the power supply waveform to a reference waveform, they complement deficiencies and eliminate any excess distortion.

Ferrum Audio

Hypsos defines a completely new category of Hi-Fi products. This is not a simple power supply, but its own audio component - as (or more) an important part of the setup as any other.

Mudra Akustik

A fundamentally new type of device for power supply of Hi-Fi equipment. PMS is a series of six modules that can be combined immediately or expanded later as needed. In almost any combination.

Vincent

The Vincent PF-2 eliminates all electrical disturbances that affect your hi-fi components or home theater system. Automativ overload protection protects the filter itself and the equipment connected to it.

See more

SHOWROOM

In our showroom, the effect of the room on the sound is minimized. This makes it possible to hear what audio playback devices are capable of at their full potential, as well as easily imagine how they will sound in other conditions. Listening can be organized on the selected equipment and with your own recordings.